Ricoh M052, Руководство по обслуживанию

Страница: 513 / 661

Error Codes
SM 7 M381
Fax Op
tion
T
y
pe SP5200
(M38
1)
Code Meaning Suggested Cause/Action
0-22
The signal from the other
end was interrupted for
more than the acceptable
modem carrier drop time
(default: 200 ms)
ƒ
Check the line connection.
ƒ
Replace the FCU.
ƒ
Defective remote terminal.
ƒ
Check for line noise or other line problems.
ƒ
Try adjusting the acceptable modem carrier
drop time.
Cross reference
Acceptable modem carrier drop time - G3 Switch
0A, bits 0 and 1
0-23
Too many errors during
reception
ƒ
Check the line connection.
ƒ
Replace the FCU.
ƒ
Defective remote terminal
ƒ
Check for line noise or other line problems.
ƒ
Try asking the other end to adjust their tx level.
ƒ
Try adjusting the rx cable equalizer setting
and/or rx error criteria.
Cross reference
Rx cable equalizer - G3 Switch 07 (PSTN)
Rx error criteria - Communication Switch 02, bits 0
and 1
0-30
The other terminal did not
reply to NSS(A) in AI short
protocol mode
ƒ
Check the line connection.
ƒ
Try adjusting the tx level and/or cable
equalizer settings.
ƒ
The other terminal may not be compatible.
Cross reference
Dedicated tx parameters - Section 4
0-32
The other terminal sent a
DCS, which contained
functions that the receiving
machine cannot handle.
ƒ
Check the protocol dump list.
ƒ
Ask the other party to contact the
manufacturer.
0-33
The data reception (not
ECM) is not completed
within 10 minutes.
ƒ
Check the line connection.
ƒ
The other terminal may have a defective
modem/FCU.