Ricoh LD013, Руководство по обслуживанию

Страница: 160 / 513

Serv
ic
e
Ta
b
le
s
USING SERVICE PROGRAM MODES
SM 5-19 B039/B040/B043
5
Mode Number/Name Function/[Setting]
SC Code Reset 810
Resets all level-A service call conditions, such as fusing
errors. (To reset SC 547, switch the machine off/on.)
[0 = No / 1 = Yes]
•
After selecting “1”, press the Original Type key and the
'
key (or OK key) at the same time to execute the
reset. If the reset is successful, the display shows
“Action completed.” If the reset fails, the display shows
“Error!!!”.
☛
4.1 Service Call Conditions
Serial Number Input 811*
Used to input the machine serial number (normally done
at the factory). This is the serial number printed on SMC
reports.
☛
5.1.13 Serial Number Input
Service Telephone Number
1 Telephone Use this to input the telephone number of the service
representative. (The number is displayed when a service
call condition occurs.)
•
To input a dash, press
!
.
•
To delete the current telephone number, press
%
.
812*
2 Facsimile Use this to input the fax number printed on user counter
reports.
•
To input a dash, press
!
.
•
To delete the current fax number, press
%
.
NVRAM Data Upload 824
Uploads SP and UP mode data (except for some items
such as counters and the serial number) from the flash
memory on the BiCU board to a flash memory card.
[0 = No / 1 = Yes]
This SP can be used when a flash memory card has been
plugged into the machine’s card slot.
☛
5.1.10 NVRAM Data Upload/Download
NVRAM Data Download 825
Downloads SP mode data from a flash memory card to
the flash memory on the BiCU board.
[0 = No / 1 = Yes]
This SP can be used when a flash memory card has been
plugged into the machine’s card slot.
☛
5.1.10 NVRAM Data Upload/Download
Program Upload 826
Uploads the system program from the flash memory on
the BICU board to a flash memory card.
[0 = No / 1 = Yes]
This SP can be used when a flash memory card has been
plugged into the machine’s card slot.
☛
5.1.9 Program Upload/Download