Ricoh LD013, Руководство по обслуживанию

Страница: 447 / 513

BIT SWITCHES
B404 5-30 SM
Plotter Switch 06
No FUNCTION COMMENTS
0 Printing while a paper cassette
is pulled out, when the Just
Size Printing feature is
enabled.
0: Printing will not start
1: Printing will start if another
cassette has a suitable size of
paper, based on the paper size
selection priority tables. Cross reference
Just size printing on/off – User switch 05, bit 5
1-7 Not used. Do not change the settings.
Plotter Switch 07
No FUNCTION COMMENTS
0-3 Not used. Do not change the settings.
4 List of destinations in the
Communication Failure Report
for broadcasting
0: All destinations
1: Only destinations where
communication failure occurred 1: Only destinations where communication failure
occurred are printed on the Communication Failure
Report.
5-7 Not used. Do not change the settings.
Plotter Switch 08 - Not used (do not change the settings)
Plotter Switch 09 - Not used (do not change the settings)
Plotter Switch 0A - Not used (do not change the settings)
Plotter Switch 0B - Not used (do not change the settings)
Plotter Switch 0C - Not used (do not change the settings)
Plotter Switch 0D - Not used (do not change the settings)
Plotter Switch 0E
No FUNCTION COMMENTS
0 Paper size selection priority
0: Width
1: Length 0: A paper size that has the same width as the
received data is selected first.
1: A paper size which has enough length to print all
the received lines without reduction is selected first.
1 Paper size selected for
printing A4 width fax data
0: 8 x 11” size
1: A4 size This switch determines which paper size is selected
for printing A4 width fax data, when the machine has
both A4 and 8” x 11” size paper.