Ricoh Laser AP1600, Руководство по установке

Страница: 44 / 68

Installing Options
32
2
G
Plug the printer's power cord
back into the wall outlet and turn
on the printer's power switch.
H
Print a configuration page to con-
firm that the RS232C board is
properly installed.
Reference
See “Making Printer Settings with
the Operation Panel” in the
“Printer Reference” included as
a PDF file on the CD-ROM.
Type 2 Printer: Installing
Printer Feature Expander Type
185
Note
❒
See the inside front cover of this
manual to confirm which printer
(Type 1 Printer or Type 2 Printer)
you have.
Important
❒
The memory unit can be damaged
by small amount of static electrici-
ty. Before touching it, touch some-
thing metal to remove static
electricity from you.
❒
To make the printer recognize the
installed option, you should set up
the option with the printer driver.
❒
This printer has one slot for Printer
Feature Expander Type 185, and
you can install one of them at a
time.
A
Be sure to check the following
points:
• The printer's power switch is
turned off.
• The power cord is unplugged
from the wall outlet.
B
Remove the back plate.
Note
❒
A coin can be used to remove
the screws.
C
Tilt the memory unit so that it is
30 degrees perpendicular to the
slot (
A
A A
A
), and push it forward (
B
B B
B
).
It should click into place.
D
Attach the back plate to its origi-
nal position.
Note
❒
A coin can be used to attach the
screws.