Ricoh Laser AP1600, Руководство по установке

Страница: 39 / 68

Type 2 Printer: Installing Options
27
2
B
Pull out the paper tray of the op-
tional paper feed unit until it
stops. After that, lift it sightly,
then pull it out.
Note
❒
Keep the paper tray with paper
in a cool and dry place.
C
While lifting the front of the en-
velope feeder, place the feeder
into the printer. Then slide it into
the printer until it stops.
Note
❒
When loading envelopes, see “
Type 2: Loading envelopes” in
the “Printer Reference”.
Type 2 Printer: Installing
Network Interface Board Type
2000
Note
❒
See the inside front cover of this
manual to confirm which printer
(Type 1 Printer or Type 2 Printer)
you have.
❒
Use the shielded twisted-pair
(STP) network interface cable.
A
Confirm that the box contains the
following items.
• Network Interface Board
• CD-ROM
• Ferrite Core
• Installation Guide
• Quick Configuration Guide
• Additional Documentation
B
Be sure to check the following
points:
• The printer's power switch is
turned off.
• The power cord is unplugged
from the wall outlet.
C
Remove the back plate.
Note
❒
A coin can be used to remove
the screws.