0
CIP Training
L5160/L513
Maintenance
CIP Training
C7200 series
Adjustment Settings for Operators
DWT315
•
The smoothness of the platen may be affected depending on the fed media. Before
feeding limp media, wipe the platen with a paper towel soaked with flushing liquid or
water, and then wipe it with a dry cloth.
3.
Close the center cover.
•
After cleaning, check that the platen is dry before setting media.
Cleaning the Pinch Rollers
If bits of media or ink are affixed to the pinch rollers, it may not be possible to successfully feed
media when printing. Clean the pinch rollers regularly.
1.
Open the center cover.
DWT134
2. If the media holding lever (front) is lowered, raise the lever.
3. Wipe off dirt on the pinch rollers by using a dry cloth, or paper towel, etc.
If necessary, wipe it off with a damp and tightly wrung cloth, and then wipe it with a dry
cloth.
