Ricoh InfoPrint 1570 Скачать руководство пользователя страница 127 | Manualshive

Страница: 127 / 148

Ricoh InfoPrint 1570 Скачать руководство пользователя страница 127

Solving option problems

127

Troubleshooting

Solving 2000-sheet drawer problems

Problem

Solution

The elevator tray does not raise when the
loading door is closed, or the elevator tray
does not lower when the door is opened and
the elevator button is pushed.

Check the following:

• The MFP is properly attached to the 2000-sheet drawer.
• The MFP is powered on.
• The power cord is plugged firmly into the back of the 2000-sheet

drawer.

• The power cord is plugged into an outlet.
• The outlet has power.

The elevator tray lowers unexpectedly.

Check to see if the MFP is out of print media or has a jam.

More than one sheet of print media is fed, or a
sheet is fed improperly.

Remove the print media in the MFP paper path, and check the stack to
ensure the print media has been loaded properly. Be sure to remove the
top and bottom sheets of each ream of paper that is loaded.

A jam occurs.

Rubber feed rollers do not turn to advance
print media.

Check the following:

• The power cord is plugged firmly into the back of the 2000-sheet

drawer.

• The power cord is plugged into an outlet.
• The outlet has power.

Consistent misfeeds or jams in the drawer

Try the following:

• Flex the paper.
• Turn the print media over.

Check the following:

• Drawer is properly installed.
• Print media is loaded correctly.
• Print media is not damaged.
• Print media meets specifications.
• Guides are positioned correctly for the print media size selected.

Service messages

A service message indicates an MFP failure that may require service.

Turn the MFP off, wait about 10 seconds, and then turn the MFP on.

If the error recurs, write down the error number, the problem, and a
detailed description. Call for service.

«
...
125
126
127
128
129
...
»

Содержание InfoPrint 1570





















































































































































Отзывы:

Нет отзывов