Ricoh Gestetner C7006 SLC6c, Руководство по установке

Страница: 62 / 70

Installing the Printer Driver and Software
52
4
Macintosh
Use the Macintosh LaserWriter 8 driver that comes with your operating system.
Important
❒
For more information about the functions of the LaserWriter 8 printer driver,
see the documentation that comes with your operating system.
❒
The PPD file is not compatible with QuickDrawGX.
❒
The LaserWriter printer driver for a Macintosh does not come with this print-
er. Use the appropriate printer driver that comes with the Macintosh operat-
ing system you are using.
Reference
This manual describes only the settings specific to this printer. Settings actu-
ally may differ depending on the version of the LaserWriter driver you are us-
ing. For more information about the LaserWriter functions, see the
documentation that comes with the Macintosh.
Note
❒
The versions of the LaserWriter driver are separated into two categories.
"LaserWriter 8.3x or earlier" refers to the LaserWriter 8.3x driver and all driv-
ers before that. "LaserWriter 8.4x or later" refers to LaserWriter 8.4x, 8.6x and
8.7. LaserWriter 8.6x was used to make this manual. The settings may differ
depending on the version of the LaserWriter driver being used.
Installing the PPD files
Limitation
❒
Be sure to install the PPD file correctly. If not installed correctly, you cannot
use it, even though it is physically installed on the printer.
A
Start the Macintosh.
B
Double-click the hard disk icon, and then double-click the [ Extensions ] fold-
er inside the [ System Folder ] .
C
Insert the CD-ROM into the CD-ROM drive.
D
Double-click the CD-ROM icon.
The contents of the CD-ROM appear.
E
Double-click the [ PRINTER DESCRIPTIONS ] folder in the CD-ROM, and then
double-click the folder having the appropriate language name.
F
Select the appropriate PPD file for the printer.
G
Copy the PPD file in the [ Printer Descriptions ] folder located inside the [ Exten-
sions ] folder.
The PPD file is installed.