Ricoh G184, Руководство по обслуживанию

Страница: 204 / 300

Firmware Updating
G165/G166/G167/G181/G183/G184 5-56 SM
Updating the Engine Firmware
1. Make a folder in your computer.
2. Save the files (.”bin", .”fwu", .”ini" and .”exe") in the folder.
3. Click the exe file to execute the updating program.
4. Click "Eng. F/W Update (USB or NET)" to send the engine firmware from PC to MF
printer.
ƒ The "F/W Update (USB or NET)" buttons are for designer use only. Do not use
these buttons.
5. The machine makes a beep sound when starting the firmware update.
6. The image above is displayed at the PC and "Firmware update" and "Updating" are
displayed on the operation panel.
7. Then, you can close this window at your PC.
ƒ
Do not turn off the machine until "Done Please reboot" is displayed in the
operation panel. Otherwise, the controller board will be damaged.
ƒ If “Done Please reboot“ does not appear, the download failed. Try again. You can
also switch from an Ethernet connection to a USB connection and see if that works.
If you still cannot download the firmware, it may be necessary to change the EGB
and/or the controller board.
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA