Ricoh G184, Руководство по обслуживанию

Страница: 189 / 300

Service Menu (MF Model)
SM 5-41 G165/G166/G167/G181/G183/G184
Service
Ta
bles
Vert.Bypass
Adjusts the vertical registration for the bypass tray.
If the machine settings are reset to the factory
defaults, this value does not change.
[-15 to 15 / 0 (Default) / 0.3 mm/step]
Horiz.Dup.Back
Adjusts the horizontal registration for the back side
in duplex mode. If the machine settings are reset
to the factory defaults, this value does not change.
[-15 to 15 / 0 (Default) / 4 mm/step]
Vert.Dup.Back
Adjusts the vertical registration for the back side in
duplex mode. If the machine settings are reset to
the factory defaults, this value does not change.
[-15 to 15 / 0 (Default) / 0.3 mm/step]
Reset Count Resets counters to factory defaults.
Clear Count Clears the Scanner and Jam Counters.
Replace Fuser
Resets the maintenance counter for the fusing unit.
This item appears only when the fusing unit life is almost expired or
has expired.
Scan Maintenance
Mono
Compression
Setting
Sets the monochrome compression type for scanning.
MH (Default)/ MR/ MMR
ADF Main Reg.
Adjusts the ADF Scan main-scan registration.
(G181 doesn't support this.)
[-2.0 to 2.0 / 0 (Default)/ 0.1 mm/step]
Regist Adjust
ADF Sub Reg.
Adjusts the ADF Scan sub-scan registration.
(G181 doesn't support this.)
[-2.0 to 2.0 / 0 (Default)/ 0.1 mm/step]
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA