Ricoh G184, Руководство по обслуживанию

Страница: 201 / 300

Firmware Updating
SM 5-53 G165/G166/G167/G181/G183/G184
Service
Ta
bles
ƒ If power failed during the download, try again. If you still cannot download the
firmware, it may be necessary to change the EGB and/or the controller board.
9. Turn the printer off and on.
Engine Firmware
1. Start SOM.
2. Click the "Printer Configuration" button on the "User Tools" tab.
3. Input " Admin074" and click the "OK" button.
4. Click the "Engine Firmware Update" button in the "SP Mode 1" tab.
5. Seek the location of the update file and select it, and then click the "Open" button.
6. SDC shows "Engine FW updating..." and the Alert LED (red) on the printer starts
blinking. (The Ready LED remains lit.)
7. Wait for a few minutes.
8. When the update has finished, SDC shows "Engine FW download completed." and the
Ready LED (green) on the printer starts blinking. (The Alert LED is still blinking.)
ƒ If "Engine FW download completed" does not appear, the download failed. Try
again. You can also switch from an Ethernet connection to a USB connection
and see if that works. If you still cannot download the firmware, it may be
necessary to change the EGB and/or the controller board.
ƒ If power failed during the download, try again. If you still cannot download the
firmware, it may be necessary to change the EGB and/or the controller board.
9. Turn the printer off and on.
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA