Ricoh G184, Руководство по обслуживанию

Страница: 101 / 300

Electrical Components
SM 3-61 G165/G166/G167/G181/G183/G184
R
ep
la
cem
en
t
Adjus
tm
ent
8. Select a plug and play name from the "PnP Name" box.
9. Click the "SP Mode 2" tab.
10. Input the LSU (laser optics housing unit) setting values in the "LSU Adjustment" box.
11. Turn off the machine.
12. Turn on the machine with the front cover open.
13. Enter SP Mode 2.
14. Close the front cover.
15. Click "Trans. Belt Adjust" to adjust the ITB (Image Transfer Belt) unit.
16. Select "ON" or "OFF" for the consecutive fusing jam detection with the "Fuser SC
Detect" box.
ƒ The default setting is "OFF.” Select "ON" only if the customer wants to use this
feature.
17. Adjust the registration for each direction (vertical and horizontal) and trays with the
"Registration" boxes if necessary.
18. Adjust the transfer roller bias and the temperature reduction of the fusing unit for each
paper type and for the front and back sides with the "2nd Transfer Front/Back" boxes.
The default settings for normal operation are all '0'.
19. Exit the "SP Mode.”
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA