Ricoh fax3900l Скачать руководство пользователя страница 173

Страница: 173 / 194

Machine Environment

153

Attach the memory card cover to
the back left of the machine.

Turn the power switch on.

Installing The Optional
Handset

Remove the information card from
the holder.

Attach the holder to the bracket
with the two screws provided.

Screw in firmly but not too tightly
(using an item such as a small coin).

Note

❒

The bracket and screws are in-
cluded with the fax machine.
The holder is included with the
optional handset.

Replace the information card.

Fix the bracket to the protruding
plastic hook on the rear left of the
machine.

Plug the handset jack into the
“TEL1” socket at the rear of the
machine.

ZCKP080N.eps

ZCKP010N.eps

ZCKP020N.eps

ZCKP030N.eps

ZCKP040N.eps

ZCKP050N.eps

Smt4EN-Ad-F_FM.book Page 153 Friday, December 8, 2000 3:42 PM

Printed Matters

Содержание fax3900l



































































































































































































Результаты поиска

Содержание fax3900l

Отзывы:

Ricoh fax3900l, Руководство по эксплуатации, Страница: 173 / 194

Результаты поиска

Содержание fax3900l

Отзывы: