G3 Switch 05
FUNCTION
COMMENTS
0
to
3
Initial Tx modem rate
Bit 3 2 1 0 Setting (bps)
0 0 0 1 2.4k
0 0 1 0 4.8k
0 0 1 1 7.2k
0 1 0 0 9.6k
0 1 0 1 12.0k
0 1 1 0 14.4k
Other settings - Not used
These bits set the initial starting modem
rate for transmission.
Use the dedicatated transmssion
parameters if you need to change this for
specific receivers.
4
5
Initial modem type for 9.6 k or 7.2 kbps.
Bit 5 Bit 4 Setting
0 0 V.29
0 1 V.17
1 0 V.34
1 1 Not used
These bits set the initial modem type for
14.4, 9.6, and 7.2 kbps, if the initial
modem rate is set at these speeds.
6-7
Do not change the settings.
G3 Switch 06
FUNCTION
COMMENTS
0
to
3
Initial Rx modem rate
Bit 3 2 1 0 Setting (bps)
0 0 0 1 2.4 k
0 0 1 0 4.8 k
0 0 1 1 7.2 k
0 1 0 0 9.6 k
0 1 0 1 12.0k
0 1 1 0 14.4k
Other settings - Not used
The setting of these bits is used to inform
the transmitting terminal of the available
modem rate for the machine in receive
mode.
Use a lower setting if high speeds pose
problems during reception.
4
to
7
Modem types available for reception
Bit 7 6 5 4 Setting
0 0 0 1 V27ter
0 0 1 0 V27ter and V29
0 1 0 0 V27ter, V29, V33, V17
Other settings - Not used
The setting of these bits is used to inform
the transmitting terminal of the available
modem type for the machine in receive
mode.
July 30th, 1996
SERVICE TABLES AND PROCEDURES
BIT SWITCHES
4-37
