Technical Bulletin
No. RTB-008
SUBJECT: Improper Stapling
DATE: Mar 31,1991
PAGE: 2 of 2
3. Solution (From April production)
The finisher frame [A] has been redesigned. For the new frame, we eliminated the shaded
area [B], making it easier to reinstall the finisher’s front and rear top covers.
3. Action (For before April production)
With a screwdriver, loosen the two screws securing the front and/or rear top cover [C].
Then, use a small flat head screwdriver as shown to pry out the edge of the cover [C] so
that it fits over the edge [D] of the frame. Tighten the screws.
[B]
[A]
Incorrect
Correct
[C]
[D]
Incorrect
Correct
[D]
[C]
[C]
[D]
[C]
[C]
[D]
[C]
