Ricoh EMP 156, Руководство по установке

Страница: 26 / 33

Preparation for installation 3-9
II L 00
(26) Pass the two Sensor Cables from the two One Touch Bushes which were fitted in the Item 3.2 (10)
(27) Connect J/P691, J/P692 (the Connector of the Sensor Cable).
(28) Connect J/P671(large motor), J/P672(small motor). (the Connector of the Motor Cable).
(29) Fasten the PK Box Assembly in the reverse order of Item 3.2 (5).
(30) Fasten the three Joint Plates to the Frame with six screws (M4x12).
(31) Fasten the Side Cover (ST) to the right side of the Frame with the two screws which were
removed in the Item 3.2(2).
(32) According to the reverse order of Item 3.2(5), 3.2(6) fasten the two FD Cover Supports and two FD
Cover Bands with the four screws
(33) Fasten the screw which was loosen in the Item 3.2(19).
Screw (2pcs)
(Removed screw in the Item 3.2(2))
Side Cover (ST) W Assembly
Joint Plate (3pcs)
Screw (M4x12)(6pcs)
J/P671 (Connector of large Motor Cable)
J/P692 (Connector of Sensor Cable)
J/P691 (Connector of Sensor Cable)
J/P672 (Connector of small Motor Cable)
One Touch Bush
One Touch Bush