Ricoh D0C8, Руководство по обслуживанию

Страница: 92 / 1647

Security Settings
D0CA/D0C9/D0C8/D0CB 2-46 SM
2.7.3 HDD ENCRYPTION
Before You Begin the Procedure
1.
Make sure that the following settings (1) to (3) are not at their factory default values.
(1) Supervisor login password
(2) Administrator login name
(3) Administrator login password
If any of these settings is at a factory default value, tell the customer these settings must be
changed before the installation procedure.
2.
Make sure that “Administrator Authentication” is On.
"Settings" icon > [System Settings] > [Administrator Authentication/User
Authentication/App Auth.] > [Administrator Authentication Management] > [Administrator
Authentication]
If this setting is off, tell the customer this setting must be on before the installation
procedure.
3.
Make sure that “Administrator Tools” is enabled (selected).
"Settings" icon > [System Settings] > [Administrator Authentication/User
Authentication/App Auth.] > [Administrator Authentication Management] > [Administrator
Tools]
If this setting is disabled (not selected), tell the customer this setting must be enabled
(selected) before the installation procedure.
Enable Encryption Setting
The data saved on the HDD, such as Address Book, authentication information, saved
documents, can be encrypted to prevent data leakage in case the HDD is removed from the
machine.
Once encryption is enabled, all data subsequently stored on the machine will be encrypted.
The encryption algorithm used in the machine is AES-256.
Setting Up Encryption
•
This function is only available for the standard hard disk. If your machine is equipped
with the Enhanced Security HDD Option, data on the hard disk is always encrypted.
Therefore, this function can only encrypt the machine's NVRAM data.
•
The machine cannot be operated while encrypting data, updating the encryption key,
or canceling encryption.
•
The encryption process takes several hours. Once the encryption process starts, it
cannot be stopped.
When setting up encryption, specify whether to start encryption after deleting data (initialize) or
encrypt and retain existing data. If data is retained, it may take some time to encrypt it.