Ricoh Caplio RR-10, Руководство по эксплуатации

Страница: 110 / 134

109
Appendix
Shutter release
button pressed
but no image
recorded SD memory card write-protect is
set to [LOCK] Release lock (write-protect). p.26
SD memory card contact surface is
dirty Clean contact surface with soft dry
cloth. ––
Cannot confirm
shot image Image confirmation time is too
short Set longer image confirmation time. p.97
No image on
LCD monitor Power is not turned on or LCD
monitor is too dark Turn camera on or adjust brightness
of LCD monitor. p.30
p.39
Video system is set to PAL and AV
cable is connected Set video system to NTSC or
disconnect AV cable. p.74
p.102
Autofocus is on
but picture is not
in focus Lens is dirty Clean lens with soft dry cloth. ––
Subject is not in centre of autofocus
field Use focus lock. p.44
Subject is difficult to focus on Use focus lock or switch to manual
focus. p.44
p.58
Flash will not
fire or will not
charge Recording mode is set to
(continuous shooting), (motion
picture) or (voice memo).
Switch recording mode to (still
picture) or (text).
p.43
p.45
Flash is set to (Flash Off) mode Cancel Flash Off mode with
button.
p.50
White balance is set to mode other
than auto Set white balance to auto mode. p.54
Battery is exhausted Charge battery or use AC adapter. p.22
p.24
Image is dark
even with flash Subject further than approx. 2.0m
away in Tele or approx. 2.5m away
in Wide Move closer to subject. p.55
Image is too
bright Subject is too close Set Flash Off mode with button. p.50
Picture is overexposed Use exposure compensation
function. Cancel time exposure
mode. p.52
p.64
Brightness of LCD monitor needs
adjusting Adjust brightness of LCD monitor. p.39
Image is too
dark Shot in low light with flash set to
(Flash Off) mode
Cancel Flash Off mode with
button.
p.50
Image is too
dark Picture is underexposed Use exposure compensation
function. Set to time exposure. p.52
p.64
Brightness of LCD monitor needs
adjusting Adjust brightness of LCD monitor. p.39
Problem Cause Remedy Page