Ricoh Caplio RICOH Gate for Macintosh, Руководство по эксплуатации

Страница: 50 / 54

48
Troubleshooting
If the camera is not functioning normally, follow the procedure
below.
■
AC adapter
• Is the adapter properly connected to the camera
and the RICOH BASE?
• Is it inserted properly into the electrical outlet?
■
USB cable
• Is the USB cable properly connected to the camera
and the RICOH BASE?
• Is it properly connected to the USB port on the
Macintosh?
m m
m m
See "Connecting the RICOH BASE to a
Macintosh" (p.17).
■
Camera
• If you are using the RICOH BASE, is the camera
properly connected?
• If the camera is connected to the Macintosh, has
the camera been turned on?
• Is the mode dial on the camera set to a mode other
than (motion picture)?
m m m m
See "Connecting the Camera to a Macintosh" (p.19).
■
Installation
• Has installation of the Caplio RR10 Software been
performed properly?
If the results of steps 1 and 2 above are all normal but
the camera still does not function properly, try the
following measures.
■
Remedy 1
1 Delete the Caplio RR10 Software.
m m
m m
See "Uninstalling the Software" (p.15).
2 Restart the Macintosh and reinstall the
Caplio RR10 Software.
m m m m
See "To install the Caplio RR10 Software" (p.11).
3 Check whether the camera functions
normally.
1. Check the connections
2. Checking installation
3. Remedy