Ricoh C249, Руководство по обслуживанию

Страница: 406 / 486

C267 6-52 SM
6.8.6 ADJUSTABLE BUFFER FINS
The printed paper bends upwards easily. This causes uneven stacking and ink
stains on the back of the paper on the delivery table. The buffer fins [A] on the
paper delivery table lift the edges of the paper, to prevent this problem. When the
paper is fed to the delivery table, these plates catch the edges of the paper, and
the paper falls in an inverted “U” shape, as shown in the diagram, with a gap
between each sheet. The plates catching the edges also make the paper fall more
slowly, and the ink dries before the paper reaches the stack.
The following table shows the recommended positions for these plates (and for the
paper guide wings) for each paper type.
Paper Weight Paper Size Paper Guide Plate
A3 SEF, 11” x 17”
SEF, B4 JIS SEF Lower the wings Down 128 g/m
2
or thicker
A4 SEF LEF, B5 JIS
SEF LEF Lower the wings Down
A3 SEF, 11” x 17”
SEF, B4 JIS SEF Raise the wings fully Up 52.3 g/m
2
-128 g/m
2
A4 SEF LEF, B5 JIS
SEF LEF Raise the wings to about 45
degrees Up
A3 SEF, 11” x 17”
SEF, B4 JIS SEF Raise the wings to about 45
degrees
Down 52.3 g/m
2
or thinner
A4 SEF LEF, B5 JIS
SEF LEF Raise the wings to about 45
degrees Down
[A]