Ricoh C249, Руководство по обслуживанию

Страница: 328 / 486

MAIN MENU NO.2: BASIC SETTINGS
C264 5-6 SM
5.3.6 SP2-33: RE-FEEDING SETTING
When the machine performs re-feeding, the paper registration position can be up to
5mm out of range. If this position is not acceptable to the customer, change this SP
mode to “OFF”.
ON: Re-feeding is on (factory setting).
OFF: Re-feeding is off.
5.3.7 SP2-34: SLOW STARTING MODE
Increase the image density of trial prints.
The figures below are drum-rotating speeds. A setting of “30rpm” will increase the
image density of trial prints.
This mode was added because trial print images are lighter than with other models.
Setting
Trial
Print
1st
Print
2nd
Print
3rd
Print
4th
Print
5th
Print
6th
Print
30rpm 30rpm 45rpm 60rpm 75rpm 90rpm 105rpm 120rpm
45rpm 45rpm 60rpm 75rpm 90rpm 105rpm 120rpm 120rpm
5.3.8 SP2-35: PRINTING PRESSURE ADJUSTMENT
Changes the printing pressure of all printing speeds (60 to 120 rpm).
NOTE: When you adjust printing pressure for each printing speed or temperature,
use SP6-70 to 87.
5.3.9 SP2-36: INK IDLING ROLLER SETTING
Ensures that the first print has sufficient ink density if the machine was not used for
a long time.
The idling roller motor turns to press the drum idling roller against the inner surface
of the drum screen.
0: OFF
1: The machine enters the drum idling mode after the master is ejected.
2: The machine enters the drum idling mode after the master is made.