Ricoh C249, Руководство по обслуживанию

Страница: 327 / 486

MAIN MENU NO.2: BASIC SETTINGS
SM 5-5 C264
C26
4
5.3.2 SP2-6 IMAGE POSITION DISPLAY
When the user moves the image position on the operation panel, this SP controls
the length of time that the adjustment value is shown on the display before the
screen goes back to the previous display.
‘Slow’ means that the display is shown for the longest time possible.
5.3.3 SP2-7: CHINESE DISPLAY SETTING (CHINA MODEL ONLY)
To change the warning message after you have made a mistake to set different
masters in the machine depends on the selling company.
0: Ricoh master type
1: Gestetner master type
5.3.4 SP2-28, 2-29, 2-38: IDLING AFTER PRINTING
Ensures that the first print has sufficient ink density if the machine was not used for
a long time. Also, when the customer continuously prints small numbers (1 to 3
prints), ink leaks occur from the trailing edge of the drum.
When SP 2-38 is on, the idling roller motor turns to press the drum idling roller
against the inner surface of the drum screen after printing. Then, the idling motor
turns to remove the ink leaks. The idling motor action depends on the settings of
SP 2-28 and 2-29.
•
If SP 2-28 is set to ‘YES’, the idling motor turns if 3 or more prints were made.
•
If SP 2-28 is set to ‘NO’, the idling motor turns if the number of prints made is the
same as or more than the setting of SP 2-29.
5.3.5 SP2-32: INK SUPPLY AFTER TRIAL
Ink is detected and supplied after the trial print when this SP is on.
SP2-38
(Idling after print)
SP2-28
(Idling after less than 3 prints)
SP2-29
(Idling after how many prints)
ON
OFF
YES
NO
-
-
-
1 to 5
-
-