Ricoh Aficio MP 4000, Руководство по обслуживанию

Страница: 904 / 1209

Error Codes
D346 14 SM
Code Meaning Suggested Cause/Action
Cable equalizer - G3 Switch 07 (PSTN)
Dedicated Tx parameters in Service Program
Mode
0-05
Modem training fails even
G3 shifts down to 2400
bps.
ƒ
Check the line connection.
ƒ
Try adjusting the tx level and/or cable
equalizer.
ƒ
Replace the FCU.
ƒ
Check for line problems.
Cross reference
See error code 0-04.
0-06
The other terminal did not
reply to DCS
ƒ
Check the line connection.
ƒ
Try adjusting the tx level and/or cable
equalizer settings.
ƒ
Replace the FCU.
ƒ
The other end may be defective or
incompatible; try sending to another machine.
ƒ
Check for line problems.
Cross reference
See error code 0-04.
0-07
No post-message
response from the other
end after a page was sent
ƒ
Check the line connection.
ƒ
Replace the FCU.
ƒ
The other end may have jammed or run out of
paper.
ƒ
The other end user may have disconnected
the call.
ƒ
Check for a bad line.
ƒ
The other end may be defective; try sending to
another machine.
0-08
The other end sent RTN or
PIN after receiving a page,
because there were too
many errors
ƒ
Check the line connection.
ƒ
Replace the FCU.
ƒ
The other end may have jammed, or run
out of paper or memory space.