Ricoh Aficio MP 4000 Скачать руководство пользователя страница 302

Страница: 302 / 1209

Using the Debug Log

D009/D011/D012/D013/D091/D092 5-26

5.8 USING THE DEBUG LOG

5.8.1 OVERVIEW

This machine provides a Save Debug Log feature that allows the Customer Engineer to

save and retrieve error information for analysis.

Every time an error occurs, debug information is recorded in volatile memory but this

information is lost when the machine is switched off and on.

To capture this debug information, the Save Debug Log feature provides two main features:

Switching on the debug feature so error information is saved directly to the HDD for

later retrieval.

Copying the error information from the HDD to an SD card.

When a user is experiencing problems with the machine, follow the procedure below to set

up the machine so the error information is saved automatically to the HDD. Then ask the

user to reproduce the problem.

5.8.2 SWITCHING ON AND SETTING UP SAVE DEBUG LOG

The debug information cannot be saved the until the "Save Debug Log" function has been

switched on and a target has been selected.

1. Enter the SP mode.

2. Under "5857 Save Debug Log", press "1".

3. On the control panel keypad, press "1" then press

. This switches the Save Debug

Log feature on.

The default setting is "0" (OFF). This feature must be switched on in order for

the debug information to be saved.

4. Next, select the target destination where the debug information will be saved. Under

"5857 Save Debug Log", touch "2 Target", enter "2" with the operation panel key to

select the hard disk as the target destination, then press

Содержание Aficio MP 4000


























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Aficio MP 4000

Отзывы:

Похожие инструкции для Aficio MP 4000

Бренды по названию

Популярные бренды

Ricoh Aficio MP 4000, Руководство по обслуживанию

Результаты поиска

Содержание Aficio MP 4000

Отзывы:

Похожие инструкции для Aficio MP 4000

Бренды по названию

Популярные бренды