Ricoh Aficio MP 4000 Скачать руководство пользователя страница 148

Страница: 148 / 1209

Controller Options

D009/D011/D012/D013/D091/D092 2-102

2.21.11

BROWSER UNIT TYPE D (D377-17)

Installation Procedure

Important

: The Browser Option can only be installed on one machine. Once the installation

is complete it cannot be installed on any other machine after that, even if it is uninstalled

from the original machine.

This option requires a HDD unit.

1. For models which have the VM card, do the following. Then continue with step 3:

- Press “User tools” button to enter the User Tools mode.

- Press “Extended Feature Settings” on the LCD.

- Press “Extended Feature Settings” on the LCD again.

- Press “Start up” tab.

- Stop all SDK applications with touching application lines.

- Exit UP mode, turn off the machine and unplug the power cord

- Remove the slot cover for SD Cards.

- Remove the SD card (VM/JAVA) from SD Slot 2.

2. Turn OFF the machine and unplug the main machine power cord.

3. Remove the SD Card Cover [1] and then turn the

Browser SD Card [2] label face to the rear of the

machine. Then push it slowly into slot 2 until you

hear a click.

4. Plug in and turn ON the Main Power Switch.

5. Push the “User Tools” key.

If an administrator setting is registered for the

machine, steps 6 and 7 are required. Otherwise,

skip to step 8.

6. Push the “Login/Logout” key.

7. Login with the administrator user name and

password.

8. Touch “Extended Feature Settings” twice on the LCD.

9. Touch “Install” on the LCD.

10. Touch “SD Card”.

⇒

Rev. 10/12/2011

Содержание Aficio MP 4000


























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Aficio MP 4000

Отзывы:

Похожие инструкции для Aficio MP 4000

Бренды по названию

Популярные бренды

Ricoh Aficio MP 4000, Руководство по обслуживанию

Результаты поиска

Содержание Aficio MP 4000

Отзывы:

Похожие инструкции для Aficio MP 4000

Бренды по названию

Популярные бренды