Ricoh Aficio MP 3500 Series Скачать руководство пользователя

Страница: 890 / 908

PRINTER AND P/S OPTIONS

D315 12

To undo an option update

1. Turn the main switch off.
2. Confirm that the RPCS Printer Unit SD card is in SD card Slot

3. Put the original option SD card (Printer Enhance Option or Scanner Enhance

Option) in SD card slot

4. Turn the main switch on.
5. Go into the SP mode and do

SP5873-002

(Undo Exec).

6.  Follow the messages on the operation panel to complete the procedure.
7.  Turn the main switch off.
8.  Remove the option SD card from Slot

9. Turn the main switch on.
10. Go into the User Tools mode and confirm that undo was successful.

User Tools> System Settings> Administrator Tools> Firmware Version> Next

11. Turn the copier off again, then reattach the SD card slot cover.

Important Notes About SD Cards

Here are some basic rules about merging applications on SD cards.

•

The data necessary for authentication is transferred with the application program

to the target SD card.

•

The SD card is the only evidence that the customer is licensed to use the

application program. The service technician may occasionally need to check the

SD card and its data to solve problems. SD cards must be stored in a safe

location at the work site.

•

Once the merge is completed, the SD card from which the application was

copied cannot be used again, but the customer must keep the card to serve as

proof of purchase.

•

An SD card from which an application has been moved to another SD card can

be restored to full operation with

SP5873 002

(Undo).

•

Before storing the card from which an application has been copied, label it

carefully so that you can identify it easily if you need to do the undo procedure

later.

CÓPIA NÃO CONTROLADA

Содержание Aficio MP 3500 Series













































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Aficio MP 3500 Series

Отзывы:

Похожие инструкции для Aficio MP 3500 Series

Бренды по названию

Популярные бренды

Ricoh Aficio MP 3500 Series, Руководство по обслуживанию

Результаты поиска

Содержание Aficio MP 3500 Series

Отзывы:

Похожие инструкции для Aficio MP 3500 Series

Бренды по названию

Популярные бренды