Ricoh Aficio MP 3500 Series Скачать руководство пользователя

Страница: 365 / 908

SERVICE PROGRAM MODE TABLES

SM 5-105

B291/B295/B296/B297

Service

Tables

T:Deliv PGS/PC

[0~9999999/

/ 1]

8671

These SPs count by color mode the total number of pages sent to a folder on a

PC (Scan-to-PC) with the Scan and LS applications.

Note:

This SP is expanded for color MFP and color LP machines. For this

machine, the count is done for black only.

S:Deliv PGS/PC

[0~9999999/

/ 1]

8675

These SPs count by color mode the total number of pages sent with Scan-to-PC

with the Scan application.

Note:

This SP is expanded for color MFP and color LP machines. For this

machine, the count is done for black only.

8681

T:PCFAX

TXPGS

8683

F:PCFAX

TXPGS

These SPs count the number of pages sent by PC Fax. These

SPs are provided for the Fax application only, so the counts for

SP8681 and SP8683 are the same.

[0~9999999/

/ 1]

•

This counts pages sent from a PC using a PC fax application, from the PC

through the copier to the destination.

•

When sending the same message to more than one place using broadcasting,

the pages are only counted once. (For example, a 10-page fax is sent to location

A and location B. The counter goes up by 10, not 20.)

8691

T:TX PGS/LS

8692

C:TX PGS/LS

8693

F:TX PGS/LS

8694

P:TX PGS/LS

8695

S:TX PGS/LS

8696

L:TX PGS/LS

These SPs count the number of pages sent from the document

server. The counter for the application that was used to store

the pages is incremented.

[0~9999999/

/ 1]

The L: counter counts the number of pages stored from within

the document server mode screen at the operation panel.

Pages stored with the Store File button from within the Copy

mode screen go to the C: counter.

NOTE:

1) Print jobs done with Web Image Monitor and Desk Top Binder are

added to the count.

2) If several documents are merged for sending, the number of pages

stored are counted for the application that stored them.

3) When several documents are sent by a Fax broadcast, the F: count is

done for the number of pages sent to each destination.

TX PGS/Port

[0~9999999/

/ 1]

8701

These SPs count the number of pages sent by the physical port used to

send them. For example, if a 3-page original is sent to 4 destinations via

ISDN G4, the count for ISDN (G3, G4) is 12.

8701 1

PSTN-1

8701 2

PSTN-2

8701 3

PSTN-3

8701 4

ISDN (G3,G4)

8701 5

Network

CÓPIA NÃO CONTROLADA

Содержание Aficio MP 3500 Series













































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Aficio MP 3500 Series

Отзывы:

Похожие инструкции для Aficio MP 3500 Series

Бренды по названию

Популярные бренды

Ricoh Aficio MP 3500 Series, Руководство по обслуживанию

Результаты поиска

Содержание Aficio MP 3500 Series

Отзывы:

Похожие инструкции для Aficio MP 3500 Series

Бренды по названию

Популярные бренды