Ricoh Aficio MP 3500 Series Скачать руководство пользователя страница 262

Страница: 262 / 908

SERVICE PROGRAM MODE TABLES

B291/B295/B296/B297 5-2

5.2 SERVICE PROGRAM MODE TABLES

Please note these general changes in this section:

•

Group 8(Data Log 2) is a new group of counters.

•

Along with the addition of Group 8, many of the Group 7 counters have been

removed.

5.2.1 SERVICE TABLE KEY

Notation

What it means

[range /

default

/ step]

Example: [-9 ~ +9 /

+3.0

/ 0.1 mm step]. The setting can be

adjusted in the range

9, value reset to +3.0 after an NVRAM

reset, and the value can be changed in 0.1 mm steps with each

key press.

Value stored in NVRAM. After a RAM reset, this default value

(factory setting) is restored.

35 cpm

B291/B296

45 cpm

B295/B297

DFU

Denotes “Design or Factory Use”. Do not change this value.

Japan only

The feature or item is for Japan only. Do not change this value.

5.2.2 SERVICE MODE LOCK/UNLOCK

At locations where the machine contains sensitive data, the customer engineer

cannot operate the machine until the Administrator turns the service mode lock off.

This function makes sure that work on the machine is always done with the

permission of the Administrator.
4. If you cannot go into the SP mode, ask the Administrator to log in with the User

Tool and then set “Service Mode Lock” to OFF. After he or she logs in:

[User Tools] > System Settings > Administrator Tools > Service Mode Lock > OFF

•

This unlocks the machine and lets you get access to all the SP codes.

•

The service technician can do servicing on the machine and turn the

machine off and on. It is not necessary to ask the Administrator to log in

again each time the machine is turned on.

5. If you must use the printer bit switches, go into the SP mode and set

SP5169

“1”.

6. After machine servicing is completed:

•

Change

SP5169

from “1” to “0”.

•

Turn the machine off and on.

•

Tell the administrator that you completed servicing the machine.

•

The administrator will then set the “Service Mode Lock” to ON.

CÓPIA NÃO CONTROLADA

Содержание Aficio MP 3500 Series













































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Aficio MP 3500 Series

Отзывы:

Бренды по названию

Популярные бренды

Ricoh Aficio MP 3500 Series, Руководство по обслуживанию

Результаты поиска

Содержание Aficio MP 3500 Series

Отзывы:

Бренды по названию

Популярные бренды