Ricoh Aficio MP 3500 Series, Руководство по обслуживанию

Страница: 752 / 908

ERROR CODES
B779 14 SM
Code Meaning Suggested Cause/Action
2-11 Only one V.21 connection
flag was received •
Replace the FCU.
2-12 Modem clock irregularity •
Replace the FCU.
2-13 Modem initialization error
• Turn off the machine, then turn it back on.
•
Update the modem ROM.
•
Replace the FCU.
2-23 JBIG compression or
reconstruction error
• Turn off the machine, then turn it back on.
•
Replace the EXFUNC board if the error is
frequent.
2-24 JBIG ASIC error •
Turn off the machine, then turn it back on.
• Replace the EXFUNC board if the error is
frequent.
2-25 JBIG data reconstruction
error (BIH error)
2-26 JBIG data reconstruction
error (Float marker error)
2-27 JBIG data reconstruction
error (End marker error)
2-28 JBIG data reconstruction
error (Timeout)
•
JBIG data error
•
Check the sender’s JBIG function.
• Update the MBU ROM.
2-29 JBIG trailing edge maker
error
• FCU defective
• Check the destination device.
2-50
The machine resets itself for
a fatal FCU system error • If this is frequent, update the ROM, or replace the
FCU.
2-51 The machine resets itself
because of a fatal
communication error •
If this is frequent, update the ROM, or replace the
FCU.
2-53 Snd msg() in the manual
task is an error because the
mailbox for the operation
task is full. •
The user did the same operation many times, and
this gave too much load to the machine.
4-01 Line current was cut •
Check the line connector.
•
Check the connection between FCU and NCU.
•
Check for line problems.
• Replace the FCU or the NCU.
4-10 Communication failed
because of an ID Code
mismatch (Closed Network)
or Tel. No./CSI mismatch
(Protection against Wrong
Connections) •
Get the ID Codes the same and/or the CSIs
programmed correctly, then resend.
•
The machine at the other end may be defective.
5-10 DCR timer expired •
Replace the FCU.
5-20 Storage impossible because
of a lack of memory
5-21 Memory overflow
•
Temporary memory shortage.
•
Test the SAF memory.
•
Replace the FCU or optional EXMEM board
5-23 Print data error when
printing a substitute rx or
confidential rx message •
Test the SAF memory.
•
Ask the other end to resend the message.
•
Replace the FCU or optional EXMEM board.
5-25 SAF file access error
• Replace the FCU or EXMEM board.
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA