Ricoh Aficio 2075 Скачать руководство пользователя страница 71

Страница: 71 / 130

Delivering Scan Files

❒

When a subject has been speci-
fied, this information is added
to the scan file.

❒

The subjects that can be selected
from the list must be registered
in

[

System Settings

]

in advance.

See

Network Guide

The procedure to specify the sub-
ject name “

[

Urgent

]

New product

appearance” is explained as an ex-
ample here.

Press

[

Attach Subject

]

Press the subject

[

Urgent

]

Press

[

Manual Input

]

The soft keyboard appears.

Enter the subject “New prod-
uct appearance”.

Press

[

]

twice.

KKKK

Press the

{{{{

Start

}}}}

key.

Note

❒

To interrupt scanning, press the

{{{{

Clear/Stop

}}}}

key or press

[

Stop

]

on the display panel.

❒

When placing multiple origi-
nals one-by-one, place the next
original. For details, see p.76
“Scanning Originals in Several
Times”.

Simultaneous Storage and
Delivery

You can use the network delivery
scanner function and the storage
function together.
The scan file is delivered and at the
same time is stored.

Note

❒

This section explains mainly the
procedure for simultaneous deliv-
ery and storage. For details, see
p.58 “Delivering Scan Files”.

AAAA

Place originals.

Note

❒

The procedure for placing origi-
nals is the same as that for plac-
ing originals for copying. For
details about placing originals,
see “Placing Originals”,

Copy

Reference

BBBB

Make settings for original orien-
tation, the sides scanned, and oth-
er settings if necessary.

Reference

p.73 “Making the Settings Relat-
ed to the Orientation of the
Original and Scanned Sides”

CCCC

Make the scan settings.

Note

❒

There are two ways to specify
scan settings, as described be-
low:
• Configure each setting for

scanning. For details, see
p.71 “Specifying Scan Set-
tings”.

• Recall registered settings. For

details, see p.79 “Programs”.

DDDD

Select the destination.

Содержание Aficio 2075



































































































































Результаты поиска

Содержание Aficio 2075

Отзывы:

Бренды по названию

Популярные бренды

Ricoh Aficio 2075, Руководство по эксплуатации

Результаты поиска

Содержание Aficio 2075

Отзывы:

Бренды по названию

Популярные бренды