Ricoh Aficio 2075 Скачать руководство пользователя страница 66

Страница: 66 / 130

Delivering Scan Files

Delivering Scan Files

Delivery Procedure

A scan file is delivered after scan set-
tings and destinations are specified. If
necessary, you can select a sender and
a subject.

AAAA

Press the

{{{{

Scanner

}}}}

key.

Note

❒

The illustration is an example.
The actual appearance may be
different.

BBBB

Make sure that no previous set-
tings remain.

Note

❒

If a previous setting remains,
press the

{{{{

Clear Modes

}}}}

key.

CCCC

Place originals.

Reference

The procedure for placing origi-
nals is the same as that for plac-
ing originals for copying. For
details about placing originals,
see “Placing Originals”,

Copy

Reference

DDDD

Make settings for original orien-
tation, the sides scanned, and oth-
er settings if necessary.

Reference

p.73 “Making the Settings Relat-
ed to the Orientation of the
Original and Scanned Sides”

EEEE

Make the scan settings.

Reference

There are two ways to specify
scan settings, as described be-
low:
• Configure each setting for

scanning. For details, see
p.71 “Specifying Scan Set-
tings”.

• Recall registered settings. For

details, see p.79 “Programs”.

FFFF

If the e-mail screen appears,
switch to the network delivery
scanner screen.

Press

[

]

Press

[

Switch Destination List

]

Press

[

Delivery Server

]

Press

[

Exit

]

The network delivery scanner
screen appears.

GGGG

Specify the destination.

You can specify the destination in
the following ways:
• Select it from the destination

list.

ZZZ607S

Содержание Aficio 2075



































































































































Результаты поиска

Содержание Aficio 2075

Отзывы:

Бренды по названию

Популярные бренды

Ricoh Aficio 2075, Руководство по эксплуатации

Результаты поиска

Содержание Aficio 2075

Отзывы:

Бренды по названию

Популярные бренды