Ricoh Aficio 2075, Руководство по эксплуатации

Страница: 30 / 130

Sending Scan Files by E-mail
22
2
Note
❒
An e-mail address found in a
search can be registered in
the list. Press
[ ProgDest ]
, and
a screen for entering the e-
mail address appears. For
more information, see
Gener-
al Settings Guide .
Checking selected destinations
A
Use the destination field at the
top of the scre en to check
which destinations are select-
ed.
Note
❒
Press [
U U U U
Prev. ] or [
T T T T
Next ] to
scroll through the list. Desti-
nations are displayed in the
order they were selected.
❒
To check the selected desti-
nations, press the
{{{{
Check
Modes
}}}}
key.
HHHH
For a reception confirmation e-
mail, press
[ Return Receipt ] .
Note
❒
If you have not specified the
sender, you cannot press the
key.
❒
When
[ Return Receipt ]
is select-
ed, an e-mail notifying that the
e-mail has been read by the des-
tination party is sent to the
sender selected here. However,
if the mailing software used by
the destination party does not
support MDN (Message Dispo-
sition Notification), the e-mail
may not be sent.
IIII
Select the file type if necessary.
A
Press [ Attached File ] .
B
Press
[ File Type ]
C
Select the file type of the file.
D
Press
[ OK ]
twice.
JJJJ
Specify the file name if necessary.
A
Press [ Attached File ] .
B
Press [ File Name ] .
The soft keyboard appears.
C
Enter a file name.
D
Press
[ OK ]
twice.
KKKK
Specify the e-mail sender.
You can specify the sender in the
following ways:
• Select the sender from the list.
• Enter the registration number of
the sender using the number
keys.
• Search for the sender.
Note
❒
Performing step
K
is unneces-
sary when [ Yes ] is selected for
[ Sender's Name Default ] in [ Send
Settings ] in [ Scanner Features ] .
❒
If you specify the sender, infor-
mation about the sender is in-
cluded in the file being sent. The
name of the specified sender is
automatically placed in the
from field of the e-mail so that
the sender can be identified
when the e-mail is received.
❒
To prevent misuse of a sender
name, we recommend you set
protection code for that sender
name.See
General Settings Guide .