Ricoh 3500SP Скачать руководство пользователя страница 236

Страница: 236 / 312

Changing/Confirming Communication Information

226

Enter a 4-digit Memory Lock ID with the number keys, and then press the

{

Start

}

key.

If you make a mistake, press

[

Clear

]

or the

{

Clear/Stop

}

key, and then try again.

To cancel printing, press

[

Cancel

]

If the Memory Lock ID does not match, the “

Specified code does not

correspond to programmed Memory Lock ID.

” message appears. Press

[

Exit

]

and retry after checking the Memory Lock ID.

Press

[

Exit

]

The standby display appears.

Note

❒

If Memory Lock and received document storage are both set to on, Memo-
ry Lock is unavailable and received documents become stored documents.

❒

Even when Memory Lock is available, if free memory is insufficient, recep-
tion is not possible.

❒

You can also apply a Memory Lock to documents that come only from cer-
tain senders.

❒

Documents received by Polling Reception are automatically printed even
if this function is switched on.

❒

You can program one of the Quick Operation keys with operations for this
function. Using the key allows you to omit step

❒

If you print a Memory Lock File, it is deleted.

Reference

p.219 “Printing/Deleting Received and Stored Documents (Print/Delete
Stored RX File)”
“Facsimile Features”, General Settings Guide
“Troubleshooting When Using the Facsimile Function”, Troubleshooting

Содержание 3500SP

























































































































































































































































































































Результаты поиска

Содержание 3500SP

Отзывы:

Бренды по названию

Популярные бренды

Ricoh 3500SP, Руководство по факсимильной связи

Результаты поиска

Содержание 3500SP

Отзывы:

Бренды по названию

Популярные бренды