manualshive.com logo in svg

Ricoh 3500SP, Руководство по факсимильной связи

Поделиться
Скачать
Ricoh 3500SP Скачать руководство пользователя страница 168

Reception

158

3

Reference

p.49 “Resolution”
p.158 “Memory Reception”
p.159 “Substitute Reception”
p.176 “Printing Options”

Memory Reception

The machine waits until all pages of the document have been received into mem-
ory before printing it.

Important

❒

About one hour after the machine is turned off, all fax documents stored in
memory are lost. If any documents are lost in this way, a Power Failure Re-
port is automatically printed when the operation switch is turned on. Use this
report to identify lost documents. See “Troubleshooting When Using the Fac-
simile Function”, Troubleshooting.

❒

The machine may not be able to receive large numbers of documents or doc-
uments with high data content. In such cases, it is recommended that you
switch off Combine Two Originals, Multi-copy Reception, Reverse Order
Printing, and Two-Sided Printing or install the optional expansion memory.

❒

The machine may not be able to receive fax documents when free memory
space is low.

❒

If free memory reaches 0% during Memory Reception, any further reception
becomes impossible and the current communication is terminated.

Note

❒

Normally this machine receives documents by Immediate Reception. But
Memory Reception is used when Combine Two Originals, Multi-copy Recep-
tion, Reverse Order Printing, or Two-Sided Printing is active.

❒

If you have selected Store for Reception File Setting, received document is
saved on the hard disk and will not be printed. You can print those docu-
ments by operating the machine or a connected computer, as necessary.

Содержание 3500SP

























































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды