Richpower Power Smith PGA2200i, Руководство оператора

Страница: 18 / 28

18
English
MAINTENANCE
Good maintenance is essential for safe, economical and trouble-free operation. It will also help reduce air pollution. The
purpose of the maintenance and adjustment schedule is to keep the generator in the best operating condition.
WARNING:
Read and understand the Important Safety Rules before starting the generator.
DANGER:
Shut off the engine before performing any maintenance. If the engine must be run, make sure
the area is well ventilated. The exhaust contains poisonous carbon monoxide gas.
WARNING:
When servicing, use only recommended or equivalent replacement parts. Use of any other
parts could create a hazard or cause product damage.
WARNING:
Allow hot components to cool to the touch prior to performing any maintenance procedure.
WARNING:
Internal pressure can build in the engine crankcase while the engine is running. Removing the
oil fill plug/ dipstick while the engine is hot can cause extremely hot oil to spray out of the crankcase and can severely
burn skin. Allow engine oil to cool for several minutes before removing the oil fill plug/dipstick.
WARNING:
Avoid skin contact with engine oil or gasoline. Prolonged skin contact with engine oil or gaso-
line can be harmful. Frequent and prolonged contact with engine oil may cause skin cancer. Take protective measures and
wear protective clothing and equipment. Wash all exposed skin with soap and water.
WARNING:
Failure to perform periodic maintenance or not following maintenance procedures can cause
the inverter to malfunction and could result in death or serious injury.
MAINTENANCE SCHEDULE
REGULAR SERVICE PERIOD (1)
Perform at every indicated
month or operating hour inter-
val, whichever occurs first.
ITEM
Before
each use Every 10
hours Every 4
months or
50 hours Every year
or 150
hours Every two
years or
300 hours
Complete
machine
Visual inspec-
tion (condition,
wear, leaks)
*
Clean *
Engine oil
Check *
Change *
(2)
*
Air filter
Check *
Clean *
(3)
Spark plug
Check *
Change *
Fuel filter Change *
(4)
Carburettor Check and clean * (4)
Valve
clearance Check and
adjustment
* (4)
(1) Log hours of operation to determine proper maintenance.
(2) The first changing of the engine oil shall be done on the first month or 10 hours, whichever is the earlier.
(3) Service more frequently when used in dusty areas.
(4) These items should be serviced by an authorized dealer unless the owner has the proper tools and is mechanically proficient.