Richpower Power Smith PGA2200i, Руководство оператора

Страница: 12 / 28

12
English
KNOWING YOUR GENERATOR
DC OUTLET --
Provides 12V DC power up to 7.5A. The DC outlet should only be used for charging 12 volt
automotive-type batteries.
AC OUTLET --
Your generator has two outlets that provide 120V, 60Hz AC power up to 14.17A. These can be used
for operating the appliances, electrical lighting, tools, and other motor loads.
USB PORT --
The two 5V 2.0A USB charging ports will charge most USB-compatible devices.
AUTO IDLE SWITCH --
The auto idle switch is used to control the speed of the engine and conserve fuel.
When Auto Idle is on and no appliances are connected to the unit, the engine will idle. If a device is added, the engine
speed will increase to power the device. If the device is removed, the engine will return to idle.
GROUND TERMINAL --
The ground terminal is used to assist in properly grounding the generator to help
protect against electrical shock. Consult with a qualified local electrician for grounding requirements in your area.
ENGINE SWITCH --
The engine switch is used when starting, stopping, and running the engine. It also controls
the choke and the fuel valve.
RECOIL STARTER --
The recoil starter is used (along with the Engine Switch) to start the generator’s engine.
RESET BUTTON --
The reset button is used to restore power if an overload occurs. To restore power, remove
all loads and depress the reset button.
PARALLEL KIT TERMINALS --
The non-polarized parallel kit terminals are used with a parallel kit (Not
included) that will allow generators to be linked together to increase power output.
FUEL CAP --
Remove the fuel cap to check and refill the fuel when needed.
FUEL TANK VENT --
Open vent to run the engine, and close the vent when the engine is off
OIL CAP / DIPSTICK --
Remove the oil fill cap to check and add engine oil to the generator when necessary.
FUEL LEVEL INDICATOR --
Indicates how much fuel remaining in the fuel tank.
DIGITAL DISPLAY SCREEN --
Displays the real time load and data, including Voltage, Frequency,
Wattage, Running Hours, Amps, and Engine Revolution Speed.
OUTPUT INDICATOR --
Light turns green during normal operating conditions.
OVERLOAD INDICATOR --
Red or Red Flashing light indicates the loads are over the generator's capacity.
OIL ALARM INDICATOR --
Red light Indicates the engine oil level is below the safe limit. It is time to check
and add engine oil.
SPARK ARRESTER --
The spark arrestor prevents sparks exiting from the muffler. It must be removed for
servicing. Avoid contact until the engine is cooled down.