40
3.1 Plotcenter
The plotcenter is only used for Richpeace plotter, the figure of the plotcenter as follows:
Please modify the calibration of the plotter when installing the machine and make sure the output
measures are no problem.
It can be modified in the plotc
enter to modify the calibration of the HPGL file, please refer to „
3.6
Calibration
‟.
3.2 File
1. Link
If the plotcenter can connect to the plotter, it will show connect successfully. If the IP is not set correct,it will
appear the following dialog box.If the TCP/IP is set correct, the plotcenter will connect to the plotter
automatically when open it. The link option will show the gray colour.
2.Break
It is for disconnect the connection between the computer and the plotter.