Stage 17
Stage 18
10
16.2 Use 100 mm (4 in) for fuel line
and 50 mm (2 in) for pressure line
16.3 Illustration of fuel line posi-
tioning inside the tank
16.4 Fuel tank installed on the
power module
100 mm (4 in) for fuel line
50 mm (2 in) for pressure line
fuel line
pressure line
INSTALLING THE ENGINE
The engine and the fuel tank are installed onto the
power module. First remove the power module from
the fuselage by removing the 4 nuts & washers
17.4 Pitts type muffler is suitable
for VMAX .46 and VMAX .52
17.5 Install the muffler to the
engine and connect fuel lines
17.1 Power module with pre-installed engine
mount and nose gear bearing
17.2 VMAX .46 or VMAX .52 2 stroke-engine are
recommended
17.3 Fit the engine to the pre-
installed engine mount
Connect to the fuel line
Connect to the pressure line
Fuel line
Pressure line
INSTALLING THE NOSE GEAR
18.1 Nose gear components
Identify the main landing gear components shown on the
photo 18.1:
- 1 nose gear with strut
- 1 steering arm
- 1 wheel collar
- 1 wheel
110 mm
