![Richmar Tens 3000 Скачать руководство пользователя страница 22](http://html1.mh-extra.com/html/richmar/tens-3000/tens-3000_instruction-manual_1454538022.webp)
22
Malfunctions
Should any malfunctions occur while using the TENS, check:
• Whether the switch/control is set to the appropriate form of
therapy, adjust the control correctly
• Whether the cable is correctly connected to the device. The cables
should be inserted completely into the sockets
• Whether the LED is illuminated. If necessary, insert a new battery.
• For possible damage to the lead wire. Change the lead wire if any
damage is detected.
Stimulation is
ineffective
Improper electrode and
applicator placement
unknown.
Reposition electrode and applicator.
Contact clinician.
The skin
becomes red
and/or you feel
a stabbing pain
Using the electrodes on the
same site every time.
Reposition the electrodes. If at any
time you feel pain or discomfort
stop use immediately.
The electrodes are not
sticking onto the skin
properly.
Ensure the electrode is stuck
securely on the skin.
The electrodes are dirty.
Replace with new electrodes.
The surface of the
electrode was scratched.
Replace with new electrodes.
Output current
stops during
therapy
The electrode pads come
off the skin.
Turn off the device and stick the
electrode pad firmly to the skin. If
that does not work, replace with
new electrodes.
The cable is disconnected.
Turn off the device and connect
the cable.
The power of the batteries
has been exhausted.
Replace them with new batteries.
7 TROUBLESHOOTING CONT