16
5.3.1 Place Electrode on Skin
Apply electrodes to the exact site
indicated by your physician or therapist.
Before applying electrodes, be sure the
skin surface over which electrodes are
placed is thoroughly cleaned and dry.
Make sure the electrodes are pressed
firmly to the skin and make good contact between the skin and the
electrodes. Place the electrodes over the skin; attach them properly,
firmly and evenly. Electrodes should be placed at least 2” but no more
than 6” apart, per channel.
CAUTION:
1. Before applying the self-adhesive electrodes, it is recommended
that you wash, degrease and dry the skin first.
2.
DO NOT
turn on the device when the self-adhesive electrodes are
not positioned on the body.
3.
NEVER
remove the self-adhesive electrodes from the skin while
the device is turned on. You will feel an uncomfortable electrical shock.
4. It is recommended that, at a minimum, 1.5” x 1.5” self-adhering,
square electrodes are used at the treatment area.
5.3.2 Electrode Placement
The placement of electrodes can be one of the most important parameters
in achieving success with this therapy. Of utmost importance is the
willingness of the physician to try the various styles of electrode placement
to find which method best fits the needs of the individual patient.
Every patient responds to electrical stimulation differently and their
needs may vary from the conventional settings suggested here. If the
initial results are not positive, speak to your physician about alternative
stimulation settings and/or electrode placements. Once an acceptable
location has been achieved, mark down the electrode sites and the
device settings, so the patient can easily continue treatment on their own.
