6
●
Install this product at right angles
with the wall and floor.
Top View
Side View
Side View
Top View
Right Angle
Right Angle
Right Angle
3.9" or less
Adjuster Knob
Shaft
Rubber on Adjuster
Rubber on Adjuster
Rubber on Adjuster must
be placed in a horizontal
direction.
Pull
Tension Force
Turn
Stand the Outer Frame
Stand the Outer Frame at
installation location with the
Rubber feet on the bottom.
※
If the Gate is installed with the Door opening to the left, a
cat might unlock the door to escape.
1
Pull out the Adjuster Knob
Secure the Outer Frame
2
3
Rubber Feet
Pull the Top Adjuster Knob out from the Outer Frame until the
Rubber on Adjuster reaches the wall.
①
Turn the Adjuster Knob in the direction of
arrow to bring it closer to the Outer Frame.
※
Please tighten the 2 Adjuster Knobs
until no space is between them and
they do not come loose.
Adjuster Knob
Outer Frame
Turn
Right-Opening
Set the Gate with the Door opening to the right as seen
from the side where cats are contained.
Place shafts located on the Top and the Bottom of Frame
on the right as seen from the side where cats are contained.
●
Make sure the Rubber on Adjusters are adhered to
the wall at 4 locations. If it is not adhered, the Gate
may fall and result in an unexpected accident.
②
Continue to turn the Adjuster Knob to increase the tension
until the Rubber on Adjuster is securely adhered to the wall.
Follow the same procedure to secure the Bottom Adjuster.
Warning
Caution
Caution
