GB 2/12
39417-05-16
IMPORTANT
This appliance has been designed with care. To get the best out of it, as you are entitled to expect, and for your safety, please read carefully
these instructions for installation and use before starting work on the installation.
The appliance must be connected using suitable fittings to an individual smoke flue specific to this appliance. A number of accessories are
also available, some of which must be fitted before installation.
- WARNING -
- This appliance is intended to burn wood, on no account may it be used as an incinerator or to burn liquid fuels, coal or derivatives.
- All local or national regulations, as well as the European standards
(2)
must be respected as well as the European standards
(2)
when installing and using
the appliance.
- The heating appliance is hot when in use, particularly the glazed front. It remains hot for a long time, even if the flames are no longer visible. Take
precautions to avoid all contact with the appliance (young children in particular).
- Before accessing the electrical connection parts, all the power circuits must be switched off.
- This appliance must be installed in accordance with the specifications of the standards
(2)
in force. Installation by a qualified professional is recom-
mended.
- The instructions in this booklet must be followed scrupulously. Keep these instructions in a safe place.
- The manufacturer's liability is limited to the supply of the appliance. It may not be held liable in the event of any failure to respect these instructions.
- The following are especially prohibited:
- The installation of materials that may be affected or damaged by the heat (furniture, wallpaper, woodwork) too close to the fire.
- The installation of any heat regenerator other than those recommended by the manufacturer.
- The use of any fuel other than natural wood and lignite.
- Any modification to the appliance or the installation not provided for by the manufacturer, which would release it from its liability and cancel the warranty.
Use exclusively spare parts recommended by the manufacturer.
- Any failure to comply with these indications is entirely the responsibility of the person who carries out the work and assembles the fire.
- Installations in public places are subject to departmental sanitary regulations, which can be obtained from the Préfecture of your region.
- The manufacturer reserves the right to modify, without prior warning, the presentation and the dimensions of its models as well as the design of the
assembly if necessary. The diagrams and texts contained in this document are the property of the manufacturer and may not be reproduced without
the latter's written permission.
(1)
Nominal output in use with the door closed; according to tests carried out in accordance with EN 13229.
(2)
EN 13229 Open fires and inserts burning solid fuel.
Ø 180
175
Ø 180
550
80
Ø 75
485
975
487
260
485
135
Ø 75
945
500
450
Ø 180
945
550
770
310
830
