Rice Lake TA Plus 124, Руководство по эксплуатации

Страница: 18 / 80

12 Visit our website www.RiceLake.com
TA Plus Balance
3.9.1 Actual Value Setting–No Change
Place the specified number of product on the balance to record the average unit weight internally.
Press
F3 or F4 softkey to select No (change) or Yes (don’t change). When there is no data recorded, this step is not available.
For YES (No Change):
1. Press ( YES ).
2. Press to scroll through the F-key commands until OK is displayed.
3. Press the OK F-key.
4. Place a container on the weigh pan and push if needed. The zero-point adjustment or tare is set.
5. Add product for counting.
For NO (Change):
1. Press ( NO ). Press or to scroll through selections.
• ON 5: 5 PCS
• ON 10: 10 PCS
• ON 30: 30 PCS
• ON 50: 50 PCS
• ON 100: 100 PCS
• ON VAR: 1-999 PCS
• PCSWGT: Unit weight value input
2. With the desired selection displayed, press .
3. Place a container on the weigh pan and push . The zero-point adjustment or tare is set.
4. Add product for total count.
3.9.2 Numeric Value Setting Method
Use the key operation to input a numeric value.
1. Press or to select whether or not to use the previous data.
When there is no data record, this step is skipped.
2. Press or to scroll through the F-key commands until OK is displayed. When OK is selected, skip to
Step 5.
3. Select the unit weight value input mode by pressing or to PSCWGT.
OK Displays onW or NUM. Select onW to display current limit OK, press NUM to enter a new limit OK
HIGH Displays onW or NUM. Select onW to display current limit high, press NUM to enter a new limit high
WEIG Press to display Weigh Mode
COUN Press to display Count Mode
PCNT Press to display Percent Mode
NEXT Press to move between menu selections
F-Key
Selections Description
Table 3-5. Counting Mode F-Key Commands (Continued)