SST4 Washdown Printer
72
Visit our website
Media Error
2 x 2 beeps
No paper is detected.
Make sure that the label sensor
is positioned correctly. If the
sensor still does not detect the
paper, run the auto-detection
function again.
Paper is finished.
Replace the label roll.
Printer feed problem.
Possible reasons: the print
medium has become trapped
around the rubber roll; the
sensor cannot detect a gap or
black mark between the labels;
there is no paper. Please reset
the sensor.
File Error
2 x 2 beeps
The memory is full. The printer
prints the message “File
System full”.
Delete unnecessary data or
install additional memory.
Unable to find file. The printer
prints the message “File Name
not found”.
Use the “~X4” command to print
all files. Then check whether
the files exist and whether the
names are correct.
A file of the same name already
exists. The printer prints the
message “Duplicate Name”.
Change the name of the file and
try storing it again.
Operation Panel
Status
Beeps
Description
Solution
Table 6-2. Error Alers (Continued)
