Rice Lake SST4, Техническое руководство

Страница: 12 / 86

SST4 Washdown Printer
6 Visit our website www.RiceLake.com
9. Assemble the split seal plates back together with the cable in between ( Figure 2-8 ).
• Run finger across the split seal plates to ensure there is no dirt or oil on the surface prior to joining the two surfaces
together.
• Make sure the larger diameter hole side is facing upwards when putting the two pieces together.
Figure 2-8. Assemble Split Seal Plates Together
10. Place the O-ring over the cable end and into the groove around the split seal plates ( Figure 2-8 , right image). This will
hold the plates together and also offer a watertight barrier.
11. Connect the communications plug to the appropriate connection on the back of the printer.
Figure 2-9. Connect Communications Cable to Back of Printer
12. Carefully push the whole split seal assembly down into the printer enclosure as shown below.
Figure 2-10. Seat the Split Seal Assembly