Rice Lake RL-650 Series, Руководство по эксплуатации

Страница: 7 / 20

Assembly 3
3.0 Assembly
3.1 Unpacking the Scale
Place the unopened carton in an open area that has ample room for unpacking the scale.
The
RL-650 Series
neonatal scale comes with four parts:
• Weighing tray
• Base assembly
• USB and RS-232 cable.
• Six AA Lithium Ion batteries
Remove each part to be assembled from the carton and unwrap the packing material carefully to prevent
scratching the parts.
3.2 Repacking
If the
RL-650 Series
neonatal scale must be returned for any reason, it must be properly packed with sufficient
packing materials. Whenever possible, use the original carton when shipping the scale back.
Damage caused from improper packaging is not covered by the warranty.
3.3 Setting up the Scale
To set up the scale, select a sturdy, flat surface on which to place the scale.
3.3.1 Inserting Batteries
The six AA Lithium Ion batteries that come with the scale offer an average of 25 hours of continuous use. To
install the batteries:
1. Tip the unit on its side to reveal the battery chamber plate location.
Figure 3-1. Battery Chamber Location (shown with the chamber plate off)
Do not tip the scale completely up side down as this could damage the load cells.
2. Using a small Phillips head screwdriver, unscrew the four screws from the battery chamber cover and set
aside.
3. Insert the six batteries into the battery chamber.
4. Close the battery chamber and tighten the screws.
5. Turn the unit right side up on a flat surface.
When using an external power supply, or when a USB power supply is connected, the battery icon on the
display is turned off. When using batteries, the backlight power is reduced to 60 percent.
Important
Important
Note