MSI CellScale
®
System • 9750A User Guide Page 27
MEASUREMENT SYSTEMS INTERNATIONAL
Firmware Version 5-XX for 2450 Modems
SECTION 5 – ID CODES
• The CellScale can store 32 ID codes. The 9750A controls which ID Code is in use.
• Each ID Code stores a Tare Value, a Total Value, a weighment counter, display mode (Net, Gross, Peak, etc...),
Unit (lb., kg, ton, etc.), and two 20 byte ID code strings. Each ID code also computes and stores statistics of
Average, Min., Max., Standard Deviation, and Coeffi cient of Variance.
• ID Codes are created when a new name is entered by the user. The name can be all numbers, all letters, or a
combination of numerals and letters. Once the name is entered by the user, the CellScale scans its memory
to see if the ID Code already exists. If it does, all new totaled weighments are added to the previously totaled
weighments, and any preexisting Tare value will be used for NET weight computation. If the name did not
already exist, the CellScale creates a new ID Code.
• ID Codes are alphabetized when created using the standard ASCII convention.
• The 9750A uses the ID function key to scroll through all existing ID Codes as an alternate means of selecting
an existing ID code.
• The ID Strings are directly accessible by programming a Function key. The function key label can be custom-
ized on the LCD screen to indicate the usage of the string. Use the ID Strings for operator IDs, customer ID,
routing numbers, etc..
ID CODE ORGANIZATION
Total Counter
Print String 1 (20 Char)
Total Register
Display Mode (Net or Gross)
Average Wt
Minimum Wt
Maximum Wt
Standard Deviation
Coef of Variance
To
Total Register
tal Register
tal Register
ID CODE NAME
Up to 8 Characters
ID CODE NAME
Up to 8 Characters
Tare Register
TT
Print String 2 (20 Char)
Up to 32
Up to 32
ID Codes
ID Codes
32 ID Codes
Custom F-Key
F-K
F-K Label 2 (8 Char)
Custom F-Key
Custom F-K
Custom F-K Label 1 (8 Char)
Units (lb, kg, etc.)
