Rice Lake IQ plus 2100, Руководство по установке

Страница: 23 / 43

18 IQ plus 2100 Installation Manual
3.1.2 EDP Command Configuration
The EDP command set can be used to configure the IQ plus 210 indicator using a personal computer, terminal, or
remote keyboard. Like Revolution, EDP command configuration sends commands to the indicator serial port;
unlike Revolution, EDP commands can be sent using any external device capable of sending ASCII characters over
a serial connection.
EDP commands duplicate the functions available using the indicator front panel and provide some functions not
otherwise available. EDP commands can be used to simulate pressing front panel buttons, to configure the
indicator, or to dump lists of parameter settings. See Section 5.0 on page 30 for more information about using the
EDP command set.
3.1.3 Front Panel Configuration
The IQ plus 210 indicator can be configured using a series of menus accessed through the indicator front panel
when the indicator is in setup mode. Table 3-1 summarizes the functions of each of the main menus.
Figure 3-2. Front Panel Key Functions in Setup Mode
Front Panel Menu Navigation
The front panel buttons are used to navigate through the menus in setup mode (see Figure 3-2). The
UNITS
(
RIGHT
)
button scrolls right (horizontally) on the same menu level; the
ZERO
(
ENTER
) button moves down (vertically) to
different menu levels and serves as an Enter key for selecting parameter values within the menus.
Menu Menu Function
CONFIG Configuration Configure grads, zero tracking, zero range, motion band, overload, and digital filtering
parameters.
FORMAT Format Set format of primary units, select alternate display units.
CALIBR Calibration Calibrate indicator. See Section 4.0 on page 27 for calibration procedures.
SERIAL Serial Configure serial port.
DIG IN Digital Input Assign digital input functions.
DEFLT Default Restore default configuration.
VERS Version Display installed software version number.
Table 3-1. IQ plus 210 Menu Summary
D I G I T A L W E I G H T I N D I C A T O R
ZERO/ENTER
Move down in menu or
enter parameter value and
return to menu level above
UNITS/RIGHT
Move right in menu /
next parameter value
kg
g
lb
oz
ZERO UNITS
Zero
Motion
Neg