Rice Lake iDimension 100, Руководство для руководителей, Страница: 24 / 57

Setup 19
Depth Sensor
The
Depth Sensor
parameters are described below.
Results
The
Results
parameter determines the handling of raw results.
Parameters Description Values
Factory Focal Length
(pixels) This parameter is the initial focal length of the depth sensor for the
purpose of factory calibration, provided in pixels relative to its
resolution. Default: 285 pixels
Valid Values: use default value
Focal Length (pixels) This parameter is the focal length of the depth sensor, provided in pixels
relative to its resolution. Default Value: 285 pixels
Valid Values: use default value
Depth Min (in) This parameter is the threshold depth value below which any depth
measure will be ignored.
It is the minimum distance allowed between
the device head and the object it is measuring.
Default Value: 27.6 in
Valid Values: 23.6 in to 70.9 in
(or
Depth max value)
Depth Max (in) This parameter is the threshold depth value above which any depth
measure will be ignored. It is the maximum distance allowed between
the device head and the object it is measuring. Default Value: 70.9 in
Valid Values: 23.6 in (or
Depth Min value) to 70.9 in
Depth Camera
Height (in) This parameter is the the distance between the depth sensor and the
base of the
iDimension 100 .
Default Value: 60.2 in
Valid Values: 23.6 in to70.9 in
Parallax This is a read only field and is the correction factor compensating for
slight parallax imperfections. N/A
Table 2-10. Depth Sensor
Parameter Description Values
Raw Dimension If on, this parameter instructs the iDimension 100 to return raw results
that have not been rounded to the nearest division.
Default: Off
Valid Values: On/Off
Table 2-11. Results