Rice Lake 181881 Скачать руководство пользователя страница 25

Страница: 25 / 74

Setup and Operation

© Rice Lake Weighing Systems

●

3.3 Standard Ai-1 Indicator Functions

3.3.1 Zeroing Wheel Weigh Pads with Indicator

The Ai-1 indicator can zero all of the connected wheel weigh pads at once or individually. The

annunciator displays if the

wheel weigh pad weight is zeroed.
To zero the whole system (all of the connected wheel weigh pads), ensure

is displayed and press

To zero a wheel weigh pad, the corresponding scale number (

example:

) must be displayed, then press

NOTE: The weight value displayed by the indicator also corresponds with scale annunciator (

, etc.).

3.3.2 Tare Options

NOTE: The tare weight is not subtracted from the displayed gross weight value, but from the sum total of the totalized

axles.

The gross, tare and net weight are present when printing on multiple print formats (

Section 3.8 on page 26

Semiautomatic Tare

1. Load wheel weigh pad with the tare weight.
2. Press

to tare the gross weight on the wheel weigh pad. The weight value and the annunciator display.

Manual Tare

1. Touch the tare weight cell on the indicator display.
2. Type in the tare weight value and confirm by pressing

. The entered value and the annunciator display.

Preset Vehicle Tare

1. Press

to switch the indicator display to the secondary weigh screen.

2. Press

to view the vehicle database.

3. Press a vehicle entry to edit.

Example:

4. Press the tare weight entry to edit.

Example:

5. Type in the tare weight value and confirm by pressing

6. Press

to return to the vehicle database. Repeat previous steps if needed for additional tare weights.

7. Press

to return to the secondary weigh screen.

Tare Cancellation Options

• Press

with the wheel weigh pads unloaded

• Manually set the tare weight value to zero
• Press

Lock/Unlock Tare

1. Press

to switch the indicator display to the secondary weigh screen.

2. Press

3. Press

4. Press

. Display returns to the secondary weigh screen. Unlocked Tare or

Locked Tare displays briefly in the indicator message cell.

VEHICLES

0001

RLWS TRUCK 1

Tare

1000lb

Esc

Scale functions

100

Lock

Unlock Tare

105

Содержание 181881











































































Результаты поиска

Содержание 181881

Отзывы:

Бренды по названию

Популярные бренды

Rice Lake 181881, Техническое руководство

Результаты поиска

Содержание 181881

Отзывы:

Бренды по названию

Популярные бренды